1. Help Center
  2. Whiz
  3. Machine Set-Up and Inspection

What is the Secondary Battery and how do I set it?

After setting the secondary battery power button on, you can remove the battery without turning the machine off. When the battery level is low, you can replace the battery with a fully recharged one while the main power switch is still on.

- The first time using the machine set the secondary battery power button on.
- After every use, set the button off, and set it on again when resuming use.
- Always check that the secondary battery power button is on every time you use the machine. If the secondary battery power is off/the secondary battery power level is low, removing the battery with the machine’s main power switch on may cause a malfunction.

* If the secondary battery power level is low, leave the battery in the machine until message disappears. Alternatively, set the machine's main power switch off and set the secondary battery switch to off.

  1. Stow the steering handle (see "Steering Handle")





  2. With two sets of hands, hold the lift handle and hold down the steering handle

    - Please operate with two people.




  3. Hold the lift handles with both hands and gently lay the machine on it's side so that the side with the dustbin is facing upwards.
    The rubber pad will support and stabilize the machine

    - Please be cautious so the steering handle does not stick out of the machine.

    - Take care not to let the machine fall forcefully or to turn.

    - Concrete or other hard surfaces will scratch the machine; place the machine on carpeting or other soft and flat surface.




  4. Press the secondary battery power button on the bottom of the machine

    - When the secondary battery power button is on, the button is sunken in the machine.

    - When the secondary battery power button is off, the button projects.




  5. With two people, hold the lift handles by both sets of hands and gently raise the machine.

    - Please operate with two people.